|
Post by Silver on Sept 15, 2016 13:54:00 GMT
|
|
|
Post by Silver on Sept 16, 2016 3:33:06 GMT
Reuploaded file, please download again. If you had installed the previous buggy file, simply delete the GEGTEST folder inside Mods folder on your 7.62 HLA install and extract this one to the main folder like the instructions above.
This will fix aiming for weapons and inventory icons
|
|
|
Post by Mace on Sept 16, 2016 21:50:32 GMT
Special thanks for Cobray M11/9. My god, you're the one, huh? By the way, you have mistakenly turned SIG-Sauer P228 to P229...P229 isn't just about different caliber, pistol also includes heavier slide which allows weapon operate with powerful ammunition such .357 SIG. In-game model lacks such changes. Hope for future correction. Thank you for release.
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 16, 2016 22:27:15 GMT
Thanks a lot ! I confirm the inventory icons bug is gone.
My first bugs : Hrvatski Samokres 2000 accept 9 mm silencers instead of .45 silencers. Default magazine for ST Kinetics CPW 5.7x28 is in 9 mm instead of 5.7x28. 7.62 sniper rifle suppressor is at 70% and other 7.62 suppressor are at 20% maximum.
|
|
|
Post by Silver on Sept 16, 2016 23:34:12 GMT
will fi x the bugs you guys reported
the silencer i forgot to change but will later, i noticed HLA uses very low values for mostly every silencer, usually max 40 or 50s, while in MERCA most silencers are 70%, while integral silencers are 90 or higher, which range of values do you guys think its better? higher or lower?
also, can anybody confirm if you can open save window in the game while it is fullscreen? when i try going to save screen in windowed mode i get a crash, does the save screen work in the fullscreen mode at least for you guys?
|
|
|
Post by Mace on Sept 17, 2016 4:06:58 GMT
"also, can anybody confirm if you can open save window in the game while it is fullscreen? when i try going to save screen in windowed mode i get a crash, does the save screen work in the fullscreen mode at least for you guys?"
Seems pretty strange to me; a while ago my game have crashed every single time i used save screen for absolutely unknown reason. Bolting through the game settings, i have found that's because of turned OFF fullscreen mode. When i turned it on, everything became stable as ground. So yeah, everything's works splendid - in my case.
|
|
|
Post by Silver on Sept 17, 2016 4:39:02 GMT
yeah i dont know what is going on, but i think it only happens if my mod is on. but on fullscreen it works okay
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 17, 2016 9:57:17 GMT
the silencer i forgot to change but will later, i noticed HLA uses very low values for mostly every silencer, usually max 40 or 50s, while in MERCA most silencers are 70%, while integral silencers are 90 or higher, which range of values do you guys think its better? higher or lower? Lower values are most realistic, they are only suppressor not "silencer". And it can be interesting for the gameplay forcing to use guns who are made for that (like the VKS or AS Val) or smaller caliber instead of "big" caliber like 7.62.
|
|
|
Post by Mace on Sept 17, 2016 18:21:18 GMT
|
|
auspice too lazy to log in
Guest
|
Post by auspice too lazy to log in on Sept 17, 2016 18:41:25 GMT
Duncan: you're 100% wrong.
IRL suppressors muffle around 90+%. Generally a suppressor reduces noise by 13 dB or more; 13 dB is 95% reduction in sound. Guns are just really loud, so they still make noise. Good suppressors irl reduce sound by 20 dB (99%) or more.
Another really important thing is that suppressors make gunshots sound like not-gunshots and make it very difficult to determine direction of a shot. Merca values were based on the fact that supersonic rounds can't be totally muffled, but greatly reduced (thus 70%ish) while subsonic rounds generally are reduced to sounds that are impossible to distinguish as gunshots (90%ish)
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 17, 2016 19:02:09 GMT
Yeah but I don't think this how it works ingame. It's more a simple value, 50% is 50% less noise. With the 70% suppressor, the IA didn't seem to know where the sound comes from even if you're at 50m.
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 18, 2016 20:50:19 GMT
A few more bugs : - The scope attachement of the SVDK 6V9 is too low. - IWI Negev NG7 SF bipod isn't detachable, normally it is. - Names for 7.62 ammo box are very strange ("wood" when is a metallic box, not the right amount of ammo, etc)
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 19, 2016 20:19:46 GMT
- HK VP70M stock can't unfold. I seem to remember that you already talk about this "bug" but I'm not sure. - Muzzle flashs for the Vepr-12 VP0-205-02 and Vepr-12 VP0-206-02 are way behind. - M712 30 magazine seems a bit long, size comparaison : - Muzzle flash of the M26 Modular Accessory Shotgun is way ahead : - The silencer of the Five-Seven Tactical is way ahead too :
|
|
|
Post by Silver on Sept 22, 2016 15:40:36 GMT
Okay keep reporting the bugs guys, im making some fixes for test and final version, and will release a minor patch with fixes soon
|
|
duncan
Junior Member
Posts: 76
|
Post by duncan on Sept 22, 2016 20:15:52 GMT
- The silencer (32 para) doesn't work with both versions of the Beretta M1935 (the only one who can accept it ?) - In the description of the suppressor for VZ-82 Scorpion it says that it can be fit on the Kedr PP-91 and when we select it, it highlights the Kedr PP-91. Except the Kedr PP-91 can't accept a suppressor (and it's right). Only the PP-91-01 "KEDR-B" can accept a suppressor : en.wikipedia.org/wiki/PP-91_KEDR- Same problem for the Imbel GC MD7 LX (.380). However I don't think it exists a version with silencer capability. - All the Imbel GC MD7 LX don't seem to be right (http://www.imbel.gov.br/index.php/pistolas) : not the right model, not the right name for the different calibers. Except maybe for the .40 S&W version. - All versions of FN P90 silencers are misaligned and too sunk into the gun (although the silencer over the barrel of the PS90 is correct but misaligned).
- Silencer for the PP-19 Bizon-2-02 (.380 ACP) is misplaced : - Same with Colt 635 : - Same for the HK P2000: - Same for the FN FNP40 Tactical (silencer is sunk into the barrel) : - Same for the OTs-33 Pernach (sunk into the barrel) :
|
|